Other Related Topics...
The FaxPress Enterprise Server Properties, a collection of the FaxPress Enterprise’s configurable fax parameters, are accessed through FaxPress Plus, the fax administration and fax transmission client.
The instructions shown below apply to both the Enterprise and Enteprise Redundant Units.
If you have not yet configured the FaxPress Enterprise or Enterprise Redundant for basic operation, see Configuring the FaxPress Enterprise orConfiguring the FaxPress Enterprise Redundant .
The FaxPress Enterprise and Enterprise Redundant Server Properties include these settings:
User Authentication (Novell only)
*Configuration required.
Two of the FaxPress Enterprise’s Server Properties, the Line Settings and the Dialing Properties, require configuration immediately, before the FaxPress Enterprise can send and receive faxes. The Email properties should also be configured. These settings enable the Enterprise to send system alert notices to the administrator and send faxes to email as well as fax recipients. They also allow users to access email address books for fax addressing, and for fax/email integration using the Email Gateway. The Routing Type settings must also be configured for integration with your PBX system and digital line.
For information on basic configuration see Configuring the FaxPress Enterprise or Configuring the FaxPress Enterprise Redundant . To configure the Enterprise for automatic routing and PBX integration, see Automatic Routing and PBX System Integration; to configure the Enterprise Redundant for automatic routing and PBX integration, see Automatic Routing and PBX System Integration. The rest of the Server Properties can be configured as needed after the FaxPress Enterprise or Enterprise Redundant is operational.
Accessing the FaxPress Enterprise/Enterprise Redundant Server Properties
| ■ | For more information on configuring the Enterprise, see Configuring the FaxPress Enterprise . |
| ■ | For more information on configuring the Enterprise Redundant, see Configuring the FaxPress Enterprise Redundant . |
To access the FaxPress Enterprise server properties, follow these steps:
| 1. | Open FaxPress Plus. (Start>Programs>FaxPress Plus>FaxPress Plus) If you need more detailed information on logging into FaxPress Plus, see FaxPress Plus: An Introduction. |
| 2. | Select the All Folders view, expand the FaxPress Neighborhood, right-click on the serial number or name of the FaxPress Enterprise, and select Login as. |
| 3. | Enter Administrator in the User Name field, and leave the Password field blank, unless you’ve already set a Administrator password. By default, the Administrator password field is blank. |
| 4. | Right-click again on the FaxPress Enterprise name or serial number, and select Properties to open the FaxPress Enterprise Server Properties. |
If you log in without Administrator privileges, the FaxPress Server Properties will be grayed out. You must be logged in with Administrator privileges to configure the Enterprise/Enterprise Redundant.
|
FaxPress Enterprise & Enterprise Redundant WebHelp
Last Updated: 11/1/2007
E-mail this page |
Castelle 855 Jarvis Drive, Suite 100 Morgan Hill, CA 95037 Toll-free 800.289.7555 Tel 408.852.8000 Fax 408.852.8100 |